Best table saw under 500 for your workshop

Having a budget of 500 bucks and have no idea which is the best table saw under 500? Well, read on through the review to find out. With $500, you can still get one of the best table saws.

What is a table saw?

This is a woodworking tool consisting of a circular saw blade, usually mounted on an arbor, driven by an electric motor. The blade protrudes through the surface of the table, which provides support for the material being cut.

After doing a comprehensive research, that involved trying and testing different table saws, we found DEWALT DW745 10-Inch Compact Job-Site Table Saw with 20-Inch Max Rip Capacity – 120V to be the best table saw under 500. Note that all the table saws being tested and tried cost below $500.

Best table saw under 500 for your workshop

DEWALT DW745 10-Inch Compact Job-Site Table Saw

Reasons for choosing the Dewalt Table saw as the best table saw under 500:

The table saw weighs 45 pounds- the weight allows for easy hauling when moving it from the workshop to your worksite. The table saw is easily portable thanks to the optimized footprint. For beveled cuts, the shoes bevels 0 – 45 degrees. The powerful 1850 Watt, 15 Amp high torque motor that delivers no-load speed of 3,850 rpm provides high performance including cutting pressure-treated lumber and hardwood.

The fence system gives 610 mm of rip capacity in a portable design to be used for cutting large sheet materials to desired size. The steel roll cage is used to protect the saw against impacts and drops. With the front and rear fence lock, rack and pinion fence system and the large clear scales give the best accurate and easy to use saw. The rack and pinion fence rails provide accurate, smooth and fast fence adjustments

The collapsible fence rails pull back to create a small and portable package. When extended, thy move out to 20 inches. At 90 degrees, you can achieve a maximum cut depth of 3-1/8 inches and 2-1/4 inches at 45 degrees. The table surface is coated to reduce friction to facilitate improved cut quality.

The 20-inch of rip cuts a variety of larger shelving and trim materials with ease.

For boosted durability, the table saw has a metal roll cage base which wouldn’t be offered by plastic bases. The cage base ensures a steady setup. The cast table top design provides accuracy and precision. The overload protection system maintains powerful performance in hard, frozen or wet woods.

Comes with mitre fence, parallel fence, blade guards, 2 blade spanners, push stick, dust port reducer and 24 tooth carbide blade. For bevel applications, the blade can be adjusted 0-45 degrees.

Easy clean up thanks to the 2-1/2 inch dust-collection port that allows you to connect the saw to a Shop-Vac for dust extraction plus cleaner work area. The on-board storage provides an easy access to the Site-Pro Guarding components and the push stick when they are not in use. Fingers and hands protected by the modular guard system. The housing fits comfortably around the stand base.

However, the table saw does not come with a stand. If you need the table saw stand, you will have to buy it separately.

 

Safety measures when using a table saw:

Read the instruction manual carefully before using the table saw. This way, you will be well informed regarding your specific table saw.

Use the push stick, push shoe or splitter when cutting thin boards.

Restrain from cutting warped boards. Bent or warped boards will cause wood to kick back.

Wear appropriate gear- eye and ear protection. Safety goggles to prevent sawdust from flying into your eyes or face. For ear protection, wear disposable earplugs or earmuffs to protect yourself from the loud saw blades.

Do not wear loose clothing. Avoid having any clothing that might get caught in the saw.

Locate the emergency turn off button. In the case of an accident, make sure you can locate the emergency turn off.

Have the blade guard installed properly. They protect debris from kicking back as well as keeping your fingers away from the blade.

Use clearance inserts when cutting thin boards, you need to protect your fingers. You might consider using a pushing device as well.

By observing the safety measures outlined above, cases of accidents will be minimal while extending the lifetime of the table saw.

 

Types of cuts by a table saw

These are the three common cuts that can be made using a table saw.

Cross cut. Cut across the grain, or any cut done across the narrower direction of the board.

Dado cut. Wide cut used in jointery.

Ripping cut. Cut going down the length of the board. Make sure to use the rip fence when making the cut.

 

Having this woodworking tool will help you achieve the desired wood- design and thickness. We would like to know what you think about our choice for the best table saw under 500 in the comments section below.


We will be happy to hear your thoughts

Leave a reply

Login/Register access is temporary disabled